3 Seater Storage Bench 214 - Pressure Treated, Hinged Lid

• Pressure treated timber throughout (lifetime preservative treatment)
• Timber sizes are nominal i.e. before machining, unless described as finished size
• All timber used in the construction of this garden bench originates from sustainable forests in Northern Europe
• Prefabricated panels for simple assembly
• The kit includes 7 main components (seat, upper back, 2 sides, front, base, lower back) and 48 screws
• Lift up hinged seat panel for access to storage area
• Weather seals
• Slatted back panel with double dowelled joints
• Sturdy legs ex 3"x2" (finished size 68x44mm)
• Sturdy scalloped arms ex 3"x2" (finished size 68x44mm)
• Substantial slats to seat back ex 3" wide (finished size 68x25mm)
• Overall bench width 5'5" (1640mm)
• Overall bench depth 2'0" (610mm)
• Overall bench height 2'11" (900mm)
• Bench seat height 1'5" (430mm)
• Storage area internal width approximately 4'10" (1475mm)
• Storage area internal depth approximately 1'4" (400mm)
• Storage area internal height approximately 1'0" (310mm)

PINE: All pine is carefully selected timber from responsibly managed sources in northern Europe. The pine is seasoned and kiln dried to achieve the correct moisture content before it is machined.

PRESSURE TREATED TIMBER: Pressure treatment is a lifetime preservative treatment. The preservative is forced deep into the timber under pressure in a vacuum and penetrates below the surface. All other treatments apply a coat of stain to the surface of the timber only. With pressure impregnated timber, the chemicals are permanently bonded to the cell structure of the wood at a molecular level. Tanalith E is a widely used water based version so pressure treated wood is often described as tanalised. Pressure treated wood is almost colourless except for a slight green tint caused by the copper content in the preservative. No further preservative treatment is ever needed. However, if you want a coloured finish you can paint over pressure treated or tanalised wood with a suitable wood preservative in any colour.

SAFETY: This product should be placed on a flat, level and hard base. Concrete and paving are ideal. Lawns are often too soft, but may be suitable with care. Children should not be allowed to climb on this product or to play around it without adult supervision. Jumping on this product is not recommended. Adults should sit down without excessive force. During the winter months and periods of adverse weather we recommend covering this product or storing it under cover.

• Base anchor kits
• Next day delivery or delay the delivery until you're ready at the same price
• Gas patio heaters

BASE ANCHORS: Our base anchor kits are designed to fix timber products firmly into a concrete or paving base. Sufficient brackets and fixings are supplied to securely fix the main supports down into the base. As a minimum, our 2 pack features 2 base anchors to fix down 2 of the supports, normally at opposite corners. Our 4 pack features 4 base anchors to fix down the supports at 4 corners. The kit includes wood screws to fix the brackets into the timber and hammer fixings to fix down into the base. The brackets feature pre-drilled holes. Drill bits are not included. If you plan to fix your product into a timber or decking base you should replace the hammer fixings with woodscrews.

PATIO HEATERS: Patio heaters are a great way to enable you and your guests to enjoy your garden in comfort for more of the year. A regulator with hose is included as standard with many of our patio heaters. The gas bottle is not included. Ventilation is required when in use.